 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20589 rev. A 03/02 MBR150 MBR160 SCHOTTKY RECTIFIER 1.0 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp = 5 s sine @ 1 Apk, TJ = 125C range Description/ Features Units A V A V C The MBR150, MBR160 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability MBR150 MBR160 1.0 50/60 150 0.65 - 40 to 150 CASE STYLE AND DIMENSIONS Conform to JEDEC Outline DO-204AL (DO-41) Dimensions in millimeters and inches www.irf.com 1 MBR150, MBR160 Bulletin PD-20589 rev. A 03/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) MBR150 50 MBR160 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 4 IFSM EAS IAR Max.PeakOneCycleNon-Repetitive Surge Current * See Fig. 6 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 150 25 4.0 0.4 A mJ A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied Value 1.0 Units A Conditions 50% duty cycle @ TC = 75C, rectangular wave form TJ = 25 C, IAS = 1 Amps, L = 10 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) Value 0.75 0.9 1.0 0.65 0.75 0.82 Units Conditions V V V V V V mA mA mA pF nH V/s @ 1A @ 2A @ 3A @ 1A @ 2A @ 3A T J = 25 C T J = 100C T J = 125 C V R = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (Rated VR) VR = rated VR TJ = 125 C TJ = 25 C IRM Max. Reverse Leakage Current * See Fig. 2 (1) 0.5 5 10 55 8.0 10000 CT LS Typical Junction Capacitance Typical Series Inductance dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range (*) Max. Storage Temperature Range Value - 40 to 150 - 40 to 150 80 Units Conditions C C C/W DC operation (*See Fig. 4) RthJL Max. Thermal Resistance Junction to Lead (**) wt Approximate Weight Case Style (*) dPtot dTj < 1 Rth( j-a) 0.33(0.012) g (oz.) DO-204AL(DO-41) thermal runaway condition for a diode on its own heatsink (**) Mounted 1 inch square PCB, Thermal Probe connected to lead 2mm from package 2 www.irf.com MBR150, MBR160 Bulletin PD-20589 rev. A 03/02 100 Reverse Current - IR(mA) 10 10 1 0.1 0.01 0.001 T J = 150C 125C 25C Instantaneous Forward Current - IF (A) 0.0001 0 10 20 30 40 50 60 70 Reverse Voltage - VR(V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1 100 Tj = 150C Tj = 125C Tj = 25C Junction Capacitance - CT (pF) T J = 25C 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 10 0 10 20 30 40 50 60 70 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 MBR150, MBR160 Bulletin PD-20589 rev. A 03/02 160 Allowable Lead Temperature (C) Average Power Loss (Watts) 1 0.8 0.6 RMS Limit 140 120 100 80 60 40 20 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Average Forward Current - I F(AV) (A) Square wave (D = 0.50) 80% Rated Vr applied DC 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC see note (2) 1.2 1.4 1.6 Average Forward Current - I F(AV) (A) Fig. 5 - Forward Power Loss Characteristics Fig. 4 - Maximum Ambient Temperature Vs. Average Forward Current, Printed Circuit Board Mounted 1000 Non-Repetitive Surge Current - I FSM (A) At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 100 10 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com MBR150, MBR160 Bulletin PD-20589 rev. A 03/02 Ordering Information Table Device Code MBR 1 1 2 60 3 TR 4 1 2 3 4 - Schottky MBR Series Current Rating: 1 = 1A Voltage Rating TR = Tape & Reel package (5000 pcs) = Box package (1000 pcs) 60 = 60V 50 = 50V Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02 www.irf.com 5 |
Price & Availability of MBR150
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |